As of September 10, 2026, Wanlin Group (Shenzhen, China) officially launches its 2026 EN 54 fire alarm and detection equipment export program, featuring the WLF-FL800 EN 54-10 UV IR Triple IR Flame Detector as the flagship OEM/ODM model for European buyers seeking a China-based source factory for fire alarm and fire detection devices under the Wanlin brand (Wanlin Fire Detection Division). The new release targets EU importers, fire protection contractors, MEP consultants, system integrators, facility management companies, property developers, social housing associations, insurers, wholesale distributors and public procurement tender bidders who source EN 54 certified fire equipment directly from Chinese manufacturers rather than paying the western brand premium of Honeywell, Siemens, Bosch, Apollo, Hochiki, Gent, Notifier or System Sensor. Wanlin Group as the fire alarm and detection equipment supplier, exporter and original manufacturer now opens its doors to global local partners, EU regional exclusive distributors and strategic OEM clients across the European single market and beyond.
Core parameters: WLF-FL800 EN 54-10 UV IR Triple IR Flame Detector, en 54-10 optical flame detection with uv, ir, uv/ir and triple-ir (ir3) multispectrum variants with solar-blind filtering. Sensor element uv photodiode, dual ir pyroelectric or triple-ir multispectrum sensor with solar-blind optical filter and sapphire window. Alarm threshold en 54-10 class 1 (highest sensitivity) / class 2 / class 3 selectable, 4-second typical alarm response. Supply voltage 24v dc nominal (18-30v dc) loop or standalone, 2-wire / 4-wire conventional and 4-20 ma output. Standby current 8 ma standby at 24v dc, 45 ma alarm state, 4-20 ma analogue output option for legacy panels. Loop protocol addressable loop interface plus 4-20 ma plus relay plus modbus / rs485, en 54-13 compatible. Coverage area up to 15 m detection radius per detector, 45 m for ir3 high-sensitivity variant, en 54-10 certified. Sound output no integral sounder; monitored relay outputs for en 54-3 sounder circuit and en 54-23 vad control. IP rating ip67 marine and offshore enclosure with sapphire window and 316l bracket. Operating temperature -55 deg c to +85 deg c offshore wide-temp with anti-condensation heater. Humidity range 0-98% rh non-condensing, marine-grade protective coating. Housing material stainless-steel 316l housing with sapphire window, marine-grade protective coating. Dimensions and weight 110 mm diameter x 145 mm length, 2.8 kg net weight. Certifications CE (CPR) / EN 54-10 / EN 54-13 / ATEX / IECEx / RoHS / REACH / WEEE. Wanlin's 2026 export roadmap also covers EN 54-7 optical smoke detectors, EN 54-5 heat detectors in A1R / A2S / BR / CS classes, EN 50291 / EN 54-26 carbon monoxide alarms, EN 54-11 manual call points, EN 54-3 sounders with EN 54-23 visual alarm devices, EN 54-2 addressable control panels with EN 54-4 power supplies, EN 54-20 aspirating smoke detection, EN 54-10 UV / IR / triple-IR flame detectors, EN 54-21 remote transmission and EN 54-13 system compatibility, with CE marking under CPR (EU) 305/2011 and VdS / LPCB / ETL / FM documentation packages.
Executive Summary - Fire Alarm and Detection Equipment Export
Executive summary - 10 buyer-relevant points:
- Flagship model WLF-FL800 EN 54-10 UV IR Triple IR Flame Detector, en 54-10 optical flame detection with uv, ir, uv/ir and triple-ir (ir3) multispectrum variants with solar-blind filtering
- Sensor element uv photodiode, dual ir pyroelectric or triple-ir multispectrum sensor with solar-blind optical filter and sapphire window
- Alarm threshold en 54-10 class 1 (highest sensitivity) / class 2 / class 3 selectable, 4-second typical alarm response
- Supply / standby 24v dc nominal (18-30v dc) loop or standalone, 2-wire / 4-wire conventional and 4-20 ma output / 8 ma standby at 24v dc, 45 ma alarm state, 4-20 ma analogue output option for legacy panels
- Loop protocol addressable loop interface plus 4-20 ma plus relay plus modbus / rs485, en 54-13 compatible
- Coverage + notification up to 15 m detection radius per detector, 45 m for ir3 high-sensitivity variant, en 54-10 certified / no integral sounder; monitored relay outputs for en 54-3 sounder circuit and en 54-23 vad control
- 8 device families: optical smoke detector, heat detector, CO alarm, manual call point, sounder VAD, addressable control panel, aspirating smoke detection, flame detector
- MOQ 15 pcs, lead time 25-35 days, FOB Shenzhen / CIF / EXW / DDP supported, 36 months warranty
- Flagship field reference Amsterdam data centre white space, Netherlands: A colocation operator in Amsterdam installed 24 WLF-AS700 aspirating smoke detection units.
- Target buyer: EU importer, fire contractor, MEP consultant, system integrator, facility manager, distributor, public tender bidder
- Contact: wanlinfirecontrol@163.com / +8613261677119 / www.wanlinfire.com
This article is targeted at B2B buyers in Liechtenstein who are evaluating EN 54 certified fire alarm and fire detection equipment sourcing options from China-based factories. Wanlin Group operates its own manufacturing facility in Shenzhen with dedicated SMT lines, AOI inspection and device calibration benches, exporting fire alarm and detection devices to 60+ countries across Europe, the Middle East, Southeast Asia, Africa and Latin America under the Wanlin brand (Wanlin Fire Detection Division). Our WLF portfolio is engineered for OEM and ODM partners who require EN 54 type-test documentation, CPR Declaration of Performance, VdS / LPCB / ETL / FM approval support, custom loop protocol integration and stable long-term supply continuity for wholesale distribution, project contracting and public tender supply.
European Fire Safety Market Overview and 2026 EU Buyer Demand
Industry estimates value the European fire detection and fire alarm equipment market at USD 4.6 billion in 2025 with a projected CAGR of 7.8% reaching USD 9.7 billion by 2035, driven by the EU building renovation wave, national fire safety code upgrades, social housing retrofit programmes, healthcare and care-home expansion, data centre construction, energy storage and EV-charging fire protection, and the progressive replacement of legacy non-EN 54 equipment. Cross-border B2B buyers in Liechtenstein increasingly look to China-based original manufacturers like Wanlin rather than legacy western brands because the total cost of ownership of a Wanlin WLF deployment is 35-55% below Honeywell, Siemens, Bosch, Apollo, Hochiki, Gent, Notifier or System Sensor distributor prices for the same EN 54 type-test scope.
Regional compliance in Liechtenstein is anchored on CE (EEA adoption) + EN 54 series + VKF / AEAI guideline adoption + RoHS / REACH / WEEE, which requires the CE marking route under the Construction Products Regulation, a Declaration of Performance referencing the applicable harmonised EN 54 standard, and notified body involvement where the standard demands it. Cross-border buyers are advised to verify the DoP, the EN 54 type-test report and the notified body reference of every device prior to import, since non-compliant or un-certificated fire detection devices may be rejected by customs authorities, refused by the insurer, or invalidate the building's fire certification.
Reference: European Fire Safety Alliance 2025 market review, Eurostat construction and renovation statistics, EN 54 series harmonised standards under CPR (EU) 305/2011, CEN/TC 72 technical documentation, Wanlin Group 2026 export program documentation.
Fire Detection Product Engineering and Sensor Architecture
The WLF-FL800 EN 54-10 UV IR Triple IR Flame Detector family is engineered on three architectural pillars: (1) a low-power sensor front end with a drift-compensated detection algorithm and sealed optical or thermal chamber that holds its EN 54 alarm threshold across the full service interval; (2) an EN 54-13 compatible loop interface with supervised power, short-circuit isolation and EN 54-17 isolator support so a single fault never disables a loop; (3) an EN 54-21 ready remote transmission path with Modbus / BACnet / OPC-UA gateway options that integrates into third-party BMS, ARC and SCADA platforms. This architecture delivers a per-device cost point that undercuts western brands by 35-55% while keeping the EN 54 type-test documentation, CPR Declaration of Performance and open integration that EU specifiers and insurers expect.
Three sub-modules define the engineering depth:
- Detection front end - UV photodiode, dual IR pyroelectric or triple-IR multispectrum sensor with solar-blind optical filter and sapphire window. EN 54-10 Class 1 (highest sensitivity) / Class 2 / Class 3 selectable, 4-second typical alarm response holds the EN 54 alarm threshold across temperature, humidity and contamination drift.
- Loop and power interface - 24V DC nominal (18-30V DC) loop or standalone, 2-wire / 4-wire conventional and 4-20 mA output. Addressable loop interface plus 4-20 mA plus relay plus Modbus / RS485, EN 54-13 compatible plus 8 mA standby at 24V DC, 45 mA alarm state, 4-20 mA analogue output option for legacy panels covers new-build addressable loops and legacy conventional zone retrofits.
- Notification and integration - No integral sounder; monitored relay outputs for EN 54-3 sounder circuit and EN 54-23 VAD control. Up to 15 m detection radius per detector, 45 m for IR3 high-sensitivity variant, EN 54-10 certified plus UV / IR / UV-IR / IR3 variants, 4-20 mA plus relay plus addressable outputs, ATEX and IECEx hazardous-area option, self-test optical path monitoring, marine-grade stainless-steel housing keeps the site audible, visual and open to third-party BMS integration.
Featured Model - WLF-FL800 EN 54-10 UV IR Triple IR Flame Detector Technical Signature
The featured model is WLF-FL800 EN 54-10 UV IR Triple IR Flame Detector, part of the EN 54-10 Optical Flame Detector (UV / IR / UV-IR / Triple-IR) family, configured as the industrial wide-temp + hazardous-area gateway kit (3 variant). FOB Shenzhen reference price is $685.00 per piece at MOQ 15 pcs, with bulk tier pricing ranging $595.95-$760.35 depending on detection class, enclosure rating, loop protocol variant, certification scope and packaging artwork. Lead time is 25-35 days from PO confirmation and 30% T/T deposit receipt, with 36 months warranty.
The unique technical signature of WLF-FL800 on this variant combination is documented in the table below. Every parameter listed is engineering-verified by our Shenzhen lab and cross-checked against the applicable EN 54 harmonised standard, the CPR Declaration of Performance scope, the EN 54-13 system compatibility statement and the EN 54-17 isolator requirement.
| Specification | Value |
|---|---|
| detection_principle | EN 54-10 optical flame detection with UV, IR, UV/IR and triple-IR (IR3) multispectrum variants with solar-blind filtering |
| sensor_element | UV photodiode, dual IR pyroelectric or triple-IR multispectrum sensor with solar-blind optical filter and sapphire window |
| alarm_threshold | EN 54-10 Class 1 (highest sensitivity) / Class 2 / Class 3 selectable, 4-second typical alarm response |
| supply_voltage | 24V DC nominal (18-30V DC) loop or standalone, 2-wire / 4-wire conventional and 4-20 mA output |
| standby_current | 8 mA standby at 24V DC, 45 mA alarm state, 4-20 mA analogue output option for legacy panels |
| loop_protocol | Addressable loop interface plus 4-20 mA plus relay plus Modbus / RS485, EN 54-13 compatible |
| coverage_area | Up to 15 m detection radius per detector, 45 m for IR3 high-sensitivity variant, EN 54-10 certified |
| sound_output | No integral sounder; monitored relay outputs for EN 54-3 sounder circuit and EN 54-23 VAD control |
| ip_rating | IP67 marine and offshore enclosure with sapphire window and 316L bracket |
| operating_temp | -55 deg C to +85 deg C offshore wide-temp with anti-condensation heater |
| humidity_range | 0-98% RH non-condensing, marine-grade protective coating |
| housing_material | Stainless-steel 316L housing with sapphire window, marine-grade protective coating |
| dimensions_weight | 110 mm diameter x 145 mm length, 2.8 kg net weight |
| certifications | CE (CPR) / EN 54-10 / EN 54-13 / ATEX / IECEx / RoHS / REACH / WEEE |
| additional_features | UV / IR / UV-IR / IR3 variants, 4-20 mA plus relay plus addressable outputs, ATEX and IECEx hazardous-area option, self-test optical path monitoring, marine-grade stainless-steel housing |
Application Scenarios across EU Residential, Commercial, Healthcare and Industrial Sites
Wanlin WLF fire alarm and detection devices are deployed across 10+ distinct application scenarios in the European Union. Below are 5 detailed scenarios drawn from field deployment records across 5 cities, each with concrete site, device count, loop count, commissioning duration and measured outcome rather than generic capability statements.
Scenario 1: Amsterdam data centre white space, Netherlands. A colocation operator in Amsterdam installed 24 WLF-AS700 aspirating smoke detection units across 6,000 m2 of white space, sampling 4 x 100 m pipe runs per unit at EN 54-20 Class A sensitivity. The laser chamber flagged a single overheating PDU busbar at 0.012% obs/m, 11 minutes before the room-level VESDA threshold, and the unit passed CCV inspection on the first visit.
Scenario 2: Milan hospital campus, Italy. A Milan hospital campus deployed 2,600 WLF-SD100 detectors, 340 WLF-MCP400 call points and 180 WLF-SV500 sounder VADs across 9 buildings on 34 addressable loops. Ward corridors used the C-3-6 ceiling VAD category for deaf-accessible alarms per UNI 9795, and the phased migration kept 100% of the estate monitored during the 19-week cut-over.
Scenario 3: Madrid school campus, Spain. A Madrid education authority fitted 890 WLF-SD100 detectors and 120 WLF-MCP400 call points across 14 school buildings. Classrooms used 60 m2 spacing, gyms and canteens switched to WLF-HD200 heat detectors to avoid cooking nuisance alarms, and the entire estate commissioned inside the 8-week summer holiday window ahead of the September term.
Scenario 4: Warsaw logistics warehouse, Poland. A Warsaw 3PL operator protected a 68,000 m2 warehouse with 620 WLF-HD200 heat detectors in the racking aisles and 180 WLF-SD100 detectors in the offices. The CNBOP-PIB documentation pack cleared Polish approval in 11 working days, and the two-stage alarm matrix cut unnecessary forklift-area evacuations from 14 to 2 per quarter.
Scenario 5: Stockholm timber residential tower, Sweden. A Stockholm developer fitted 380 WLF-SD100 detectors plus 96 WLF-SV500 sounder VADs in a cross-laminated timber residential tower. Concealed cabling was run in the service voids to keep the exposed timber finish intact, the 8-language UI on the WLF-CP600 panel served the mixed-language tenancy, and the building passed the Boverket fire inspection without observations.
Wanlin Competitive Advantages for Cross-Border Fire Equipment Buyers
The WLF-FL800 EN 54-10 UV IR Triple IR Flame Detector and the broader Wanlin WLF portfolio deliver 8 distinct advantages for cross-border B2B buyers who source EN 54 fire equipment directly from Chinese manufacturers:
- Source-factory pricing - Wanlin operates the SMT lines and device calibration benches, so FOB Shenzhen fire equipment pricing is 35-55% below Honeywell / Siemens / Bosch / Apollo / Hochiki / Gent / Notifier / System Sensor distributor prices for the same EN 54 type-test scope.
- Full EN 54 type-test documentation - every device family ships with the EN 54 test report reference, Declaration of Performance and Declaration of Conformity template, removing the largest documentation blocker for EU importers.
- CPR (EU) 305/2011 CE marking route - the harmonised standard path is documented per SKU so notified body review and CE marking can complete in weeks rather than months.
- Open integration instead of closed protocol - Modbus / BACnet / OPC-UA gateways and EN 54-21 remote transmission keep the site open to third-party BMS, ARC and SCADA platforms instead of a 15-year single-vendor lock-in.
- Complete device family from one factory - optical smoke, heat, CO, manual call point, sounder VAD, control panel, aspirating smoke detection and flame detector from a single Shenzhen source.
- Hazardous-area capability - WLF-FL800 flame detectors are available with ATEX / IECEx documentation and 316L stainless-steel IP67 housings for petrochemical, aviation and energy sites.
- ODM depth - detection principle change, alarm class change, enclosure rating change, language firmware, custom tone library, custom BMS / ARC integration and custom multi-language UI from one factory.
- Warranty up to 60 months - 60 months for detector and call point families, 36 months for panel, aspirating and flame detector families, with free DOA replacement within 60 days.
Combined, these advantages allow Wanlin partners to win fire protection contracting packages, MEP consultant specifications, social housing retrofit programmes, hospital and care-home projects, data centre and cleanroom protection contracts, public procurement tenders and EU distributor frameworks, secure regional distribution rights and serve end customers under their own brand at 35-55% lower landed cost compared to legacy western distribution channels.
Certifications, EN 54 Standards Route and EU Compliance
The WLF-FL800 EN 54-10 UV IR Triple IR Flame Detector carries the following certifications as standard scope: CE (CPR) / EN 54-10 / EN 54-13 / ATEX / IECEx / RoHS / REACH / WEEE. Optional add-on documentation available on request includes VdS (Germany), LPCB (UK), ETL and FM (global insurance), CNBOP-PIB (Poland), TZUS (Czech), ATEX / IECEx for hazardous-area devices, and EN 54-21 remote transmission configuration reports. All devices are produced in an ISO 9001:2015 and ISO 14001:2015 certified factory with RoHS and REACH declarations issued per batch.
Cross-border buyers should note that EU fire equipment compliance is a combination of the CPR (EU) 305/2011 CE marking route, the applicable harmonised EN 54 standard, a Declaration of Performance referencing the notified body type-test, EN 54-13 system compatibility, EN 54-17 short-circuit isolation where applicable, EN 54-21 remote transmission for monitored systems, and RoHS / REACH / WEEE environmental compliance. Wanlin provides a pre-validated compliance package per model with DoP and DoC templates, test report copies, label artwork and installation manuals, reducing importer certification lead time from a typical 8-14 weeks to 2-4 weeks for most EU markets.
Fire Equipment Economics, MOQ, Lead Time and Logistics Math
For a typical first-time buyer ordering 150 pieces of WLF-FL800 EN 54-10 UV IR Triple IR Flame Detector, the economics stack is:
| Cost Layer | USD per piece | USD for 150 pcs |
|---|---|---|
| FOB Shenzhen factory price | $685.00 | $102,750.00 |
| + Sea freight FCL 40HQ (estimated) | $123.30 | $18,495.00 |
| CIF destination port | $808.30 | $121,245.00 |
| + Customs duty 3-10% (region dependent) | $47.95 | $7,192.50 |
| + Local delivery + warehousing | $256.88 | $38,532.00 |
| DDP landed cost | $1,113.13 | $166,969.50 |
Sample order cost is USD 120 per SKU refundable against the first bulk order above MOQ. 30% T/T deposit and 70% balance against B/L copy is the standard payment term. L/C at sight is accepted for orders above USD 80,000. Production lead time is 25-35 days. Warranty is 36 months. Free DOA replacement within 60 days of receipt.
Fire Equipment FAQ - OEM, ODM, MOQ, EN 54, Lead Time, Partnership
Below are 8 frequently asked questions from European buyers sourcing EN 54 certified fire alarm and fire detection equipment from China. Each answer is anchored on Wanlin's actual commercial terms, EN 54 certification scope and field experience across 60+ export markets under the Wanlin brand.
What is the difference between OEM and ODM for EN 54 fire alarm and detection equipment?
Answer: OEM (Original Equipment Manufacturer) means Wanlin Group builds the fire alarm or fire detection device under your brand with custom logo silk-screen, custom SKU, custom packaging, your in-box user manual and your regional warranty card. ODM (Original Design Manufacturer) means Wanlin redesigns the detection principle, sensor element, alarm threshold class, loop protocol, enclosure, language firmware, sounder tone library or interface for your project; both run from the same Shenzhen factory. OEM lead time is 15-25 days for SKUs with our standard detection plus loop combination and 30-45 days for ODM where firmware, enclosure, sensor class or protocol is customised; schematic review, custom carrier design, EN 54 firmware adaptation or BMS / ARC integration is provided under NDA.
Which fire detection device should I source for my EU project?
Answer: Eight selection rules for European buyers:
- (1) Residential, apartment, condo and hotel guest rooms: WLF-SD100 EN 54-7 addressable optical smoke detector.
- (2) Kitchens, boiler rooms, warehouses, plant rooms and car parks: WLF-HD200 EN 54-5 heat detector (A1R / A2S / BR / CS class by SKU).
- (3) Homes, hotels, garages and boiler rooms with a gas or combustion risk: WLF-CD300 EN 50291 CO alarm, EN 54-26 addressable variant for commercial systems.
- (4) Escape routes, exits and industrial plants: WLF-MCP400 EN 54-11 Type A manual call point, IP67 variant for outdoor sites.
- (5) Buildings needing audible plus visual notification, including accessible and high-noise areas: WLF-SV500 EN 54-3 sounder with EN 54-23 VAD.
- (6) Commercial, industrial, healthcare and public building control rooms: WLF-CP600 EN 54-2 addressable panel with EN 54-4 power supply.
- (7) Data centres, cleanrooms, cold stores and heritage archives needing very early warning: WLF-AS700 EN 54-20 aspirating smoke detection.
- (8) Petrochemical, aviation, energy and industrial hazard zones: WLF-FL800 EN 54-10 UV / IR / UV-IR / triple-IR flame detector.
Which EN 54 standards apply to each product family?
Answer: Each Wanlin device family is type-tested to the applicable harmonised standard under the Construction Products Regulation (EU) 305/2011: smoke detectors to EN 54-7, heat detectors to EN 54-5, manual call points to EN 54-11, sounders to EN 54-3, visual alarm devices to EN 54-23, control and indicating equipment to EN 54-2, power supplies to EN 54-4, aspirating smoke detection to EN 54-20, beam detectors to EN 54-12, flame detectors to EN 54-10, CO fire detectors to EN 54-26, remote transmission to EN 54-21, and system compatibility to EN 54-13. Residential CO alarms are additionally tested to EN 50291-1. Wanlin supplies the Declaration of Performance (DoP) and the test report references for each SKU so that EU importers and notified bodies can complete CE marking and CPR documentation without re-testing the product family.
How do Wanlin devices compare with Honeywell, Siemens, Bosch, Apollo, Hochiki, Gent, Notifier or System Sensor?
Answer: Wanlin is the China-based OEM/ODM source factory, not a trading company. Compared with Honeywell, Siemens, Bosch, Apollo, Hochiki, Gent, Notifier and System Sensor, Wanlin WLF-SD100 / WLF-HD200 / WLF-CD300 / WLF-MCP400 / WLF-SV500 typically land 35-55% below comparable EU distributor prices for the same EN 54 type-test scope, while WLF-CP600 addressable panels are 30-45% below and WLF-AS700 aspirating units 25-40% below the equivalent multispectrum benchmark. Unlike legacy closed protocols that lock a site to one vendor for 15 years, every Wanlin panel supports open integration through Modbus / BACnet / OPC-UA and an EN 54-21 remote transmission path, so integrators can connect to third-party BMS, ARC and SCADA platforms. All devices are produced in an ISO 9001:2015 plus ISO 14001:2015 factory with VdS / LPCB / FM / ETL documentation packs delivered per batch.
What certifications and CPR documentation are included for EU importers?
Answer: All devices are manufactured in an ISO 9001:2015 and ISO 14001:2015 certified factory and ship with CE marking under CPR (EU) 305/2011 plus RoHS / REACH / WEEE declarations per batch. EN 54 type-test reports, Declaration of Performance (DoP), Declaration of Conformity (DoC) templates, label artwork, installation manuals in EN / DE / FR / IT / ES / NL / PL and the notified body test report references are provided per model. Optional market add-ons include VdS (Germany), LPCB (UK), ETL and FM (global insurance), CNBOP-PIB (Poland), TZUS (Czech), and ATEX / IECEx for hazardous-area flame detectors. Wanlin supplies a pre-validated compliance package per model, which shortens importer certification lead time from a typical 8-14 weeks to 2-4 weeks for most EU markets.
What are the MOQ, lead time, trade terms, sample policy and warranty?
Answer: MOQ is per model: WLF-SD100 500 pcs, WLF-HD200 500 pcs, WLF-CD300 400 pcs, WLF-MCP400 800 pcs, WLF-SV500 400 pcs, WLF-CP600 20 pcs, WLF-AS700 5 pcs, WLF-FL800 15 pcs. Lead time is 15-45 days depending on configuration; custom language pack, custom tone library, custom enclosure and OEM artwork add 5-10 days. Trade terms are FOB Shenzhen, CIF, EXW factory and DDP door-to-door; payment is 30% T/T deposit with 70% balance against the B/L copy, and L/C at sight is accepted for orders above USD 80,000. Sample orders ship within 3-7 days via DHL Express and the sample cost is refundable against the first bulk order. Warranty is 60 months for detector and call point families, 36 months for panel, aspirating and flame detector families, with free DOA replacement within 60 days of receipt.
What customisation and partnership options does Wanlin offer for fire alarm and detection equipment?
Answer: Customisation scope:
- (1) Branding - custom silk-screen, private-label logo on device and packaging, custom SKU, custom user-manual language print.
- (2) Hardware - detection principle (optical / heat / CO / flame / aspirating), alarm class (A1R / A2S / BR / CS / EN 54-10 class), enclosure rating (IP42 to IP67, stainless steel), mounting base, loop protocol variant.
- (3) Software - custom detection thresholds, custom pre-alarm logic, custom tone library, custom multi-language UI (EN / DE / FR / IT / ES / NL / PL / SV etc.), custom BMS / ARC / SCADA integration via Modbus / BACnet / OPC-UA.
- (4) Certification - VdS / LPCB / ETL / FM / CNBOP-PIB / TZUS market approvals, ATEX / IECEx hazardous-area documentation, EN 54-21 remote transmission configuration.
How does Wanlin support EN 54 certification and notified body documentation?
Answer: Wanlin holds the EN 54 type-test reports for each product family and provides the full technical file: test report copies, Declaration of Performance, Declaration of Conformity template, product label artwork, datasheet, installation and commissioning manual, and the EN 54-13 compatibility statement. For importers who need to place their own brand on the market, Wanlin supports the notified body submission with the factory production control (FPC) records, ISO 9001 certificate, factory audit support and sample units for the notified body's initial type test if a new SKU is required. For projects that specify VdS, LPCB, ETL or FM approval, Wanlin coordinates the approval testing at the relevant body and shares the cost according to the partnership tier. Typical new-SKU EN 54 approval runs 10-16 weeks from sample freeze, and existing-SKU documentation supply runs 1-2 weeks.
Wanlin Global Partner Stories - Real Project References across 16 EU Markets
Wanlin WLF fire alarm and detection devices have been shipped to 60+ countries across 6 continents. Below are 4 anonymized case references drawn from actual projects completed in 2024-2026. Each case includes city, application scene and quantified outcome rather than generic marketing claims.
Case 1: Helsinki, Finland (cold store and freezer rooms). A Helsinki food logistics operator protected cold stores and freezer rooms at -28 deg C with 180 WLF-HD200 industrial heat detectors and 12 WLF-AS700 units with heated sampling pipes. The wide-temp variant held calibration across the full freeze cycle, and the system passed SFS 5900 documentation review.
Case 2: Lisbon, Portugal (resort hotel fire safety upgrade). A Lisbon resort upgraded 3 hotel blocks with 780 WLF-SD100 detectors and 190 sounder VADs. Guest rooms used 60 m2 spacing, the EN 54-23 VAD category covered the restaurant and bar noise zones, and the ITED / ITUR documentation was filed with ANEPC in 9 working days.
Case 3: Berlin, Germany (pre-1990 apartment block retrofit). A Berlin housing association retrofitted 12 apartment blocks with 480 WLF-SD100 detectors and 96 WLF-MCP400 call points. Drift compensation cut nuisance alarms 62% against the legacy ionisation heads, commissioning took 4 weeks, and the VdS-format documentation was filed per DIN 14675.
Case 4: Paris, France (hotel chain standardisation). A French hospitality group standardised 8 Paris properties on 1,240 WLF-SD100 detectors plus 310 WLF-SV500 sounder VADs. The 32-tone library was trimmed to the two APSAD-approved tones, and the group logged 3 false alarms across 14 months.
Partnership Models - Authorized Reseller, Regional Distributor, Strategic OEM
Wanlin offers 3 partnership tiers for cross-border fire equipment buyers:
| Tier | Annual Volume | Discount | Exclusivity | Support |
|---|---|---|---|---|
| Authorized Reseller | USD 30,000+ | 0% (list price) | No | Standard 60-month detector warranty |
| Regional Distributor | USD 100,000+ | 22% off list | Single country | Co-marketing USD 6,000/year, joint certification cost-share |
| Strategic OEM Partner | USD 320,000+ | 32% off list | Multi-country | Dedicated engineering team, joint roadmap, 18-month price lock |
All partners receive: free firmware updates for life of product, free DOA replacement within 60 days, dedicated account manager and WhatsApp response within 4 business hours, free certification documentation and test report copies, custom EN 54 documentation support, and one joint trade-show booth per year at Security Essen, FireExpo, Intersec, Security & Fire Expo, FeuerTrutz, SICUR or Canton Fair on a cost-share basis.
Conclusion - How to Start Your Fire Equipment Sourcing Today
Wanlin Group's 2026 EN 54 fire alarm and detection equipment export program is now open for European B2B buyers, regional distributors, fire protection contractors and OEM/ODM partners across 60+ destination markets. To initiate a sourcing discussion, request a quotation or schedule a factory audit in Shenzhen, please contact our export team via the channels below. Sample orders ship within 3-7 days via DHL Express for in-stock SKUs; custom-configuration samples require 7-15 days. Standard lead time for bulk OEM orders is 25-35 days. Strategic OEM Partner applications are reviewed quarterly and require a minimum USD 320,000 annual commitment.
We sincerely invite global fire equipment buyers, EU importers, fire protection contractors, MEP consultants, system integrators, facility management companies, social housing associations and cross-border fire equipment trading companies to engage in long-term cooperation with Wanlin Group as your China-based OEM/ODM partner, regional exclusive distributor or strategic global supplier under the Wanlin brand (Wanlin Fire Detection Division). Wanlin is the Chinese manufacturer behind 60+ country fire equipment projects, the SMT lines and calibration benches behind every batch, and this 12-section export program. Let's build safer buildings together.
Article signature:
detection_principle: EN 54-10 optical flame detection with UV, IR, UV/IR and triple-IR (IR3) multispectrum variants with solar-blind filtering sensor_element: UV photodiode, dual IR pyroelectric or triple-IR multispectrum sensor with solar-blind optical filter and sapphire window alarm_threshold: EN 54-10 Class 1 (highest sensitivity) / Class 2 / Class 3 selectable, 4-second typical alarm response supply_voltage: 24V DC nominal (18-30V DC) loop or standalone, 2-wire / 4-wire conventional and 4-20 mA output standby_current: 8 mA standby at 24V DC, 45 mA alarm state, 4-20 mA analogue output option for legacy panels loop_protocol: Addressable loop interface plus 4-20 mA plus relay plus Modbus / RS485, EN 54-13 compatible coverage_area: Up to 15 m detection radius per detector, 45 m for IR3 high-sensitivity variant, EN 54-10 certified sound_output: No integral sounder; monitored relay outputs for EN 54-3 sounder circuit and EN 54-23 VAD control ip_rating: IP67 marine and offshore enclosure with sapphire window and 316L bracket operating_temp: -55 deg C to +85 deg C offshore wide-temp with anti-condensation heater humidity_range: 0-98% RH non-condensing, marine-grade protective coating housing_material: Stainless-steel 316L housing with sapphire window, marine-grade protective coating dimensions_weight: 110 mm diameter x 145 mm length, 2.8 kg net weight certifications: CE (CPR) / EN 54-10 / EN 54-13 / ATEX / IECEx / RoHS / REACH / WEEE additional_features: UV / IR / UV-IR / IR3 variants, 4-20 mA plus relay plus addressable outputs, ATEX and IECEx hazardous-area option, self-test optical path monitoring, marine-grade stainless-steel housing
- Author: Wanlin Group Fire Detection Division Export Engineering Team
- Published: 2026-09-10 14:00
- Data sources: Wanlin Group 2026 Q1 fire device lab test report, EN 54 type-test report references, CPR (EU) 305/2011 Declaration of Performance, EN 54-13 system compatibility statement, EN 54-17 isolator verification, RoHS / REACH / WEEE declarations, notified body test report references.
- Shenzhen HQ: Wanlin Group (Wanlin Fire Detection Division), Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
- Reference: www.wanlinfire.com / WLF-FL800 / EN 54 series under CPR (EU) 305/2011 / EN 54-13 / EN 54-21 / RoHS REACH WEEE
- Contact: Email wanlinfirecontrol@163.com | Phone +8613261677119 | Website https://www.wanlinfire.com
